Post-construction care for natural stone
Natural stone may encounter problems that need professional treatment to ensure the beauty of natural stone right after finishing construction and installation. If there is only dust on natural stone surface, then just use specialized cleaning products such as Neugel or Algafloor.
However, due to the preparation process of material or bad protection of after construction as well as the traffic of the other contractors, natural stone frequently encounter the following common problems:
- Scratches, loss of polishness: Re-polishing is essential to remove scratches and restore surface polishness.
.
Scratches on natural stone surface due to improper protection after installation
- Stains: During construction process, mortar, cement, glue or paint ... could be stacked on natural stone surface. If these stains are not immediately cleaned, then they can not be cleaned in the normal way. It requires to use use special chemicals for natural stone such as Disycott, Decera/p.
Stains on natural stone surface after installation
- Water absorption causing yellow stains, especially on the grout. Improper impregnation (not impregnated, not well impregnated, improper impregnator…) is the main reason of this problem. Dedicated products such as Oxidant, Margel, No Rug will be used to dry the stains. Then, re-impregnation is applied to prevent stains reappear with appropriate quality impregnators such as Hidro Protector MM, Pro TW Lux, Hidro 500
Yellow stains on natural stone
For more information about natural stone cleaning, please contact:
Stonecare –Vinastone Ltd
Ms. Le Thi Thao
Email: mailto:stonecare@vinastone.com
Tel: 04.3 642 17 21 (Ext. 106)/ 0989 952 799
Website: stonecare.info