Due to the natural characteristics, light-colored stones and marble are very vulnerable to external factors, leading to water absorption, yellow stains, scratch ... To protect the stones, it is very important to use right impregnator. We would like to introduce Hidro Protector MM – a water based impregnator for the protection of polished marble, granite and natural/artificial stone surfaces.

Its ecological formulation guarantees surface protection from water, dirt and oil/grease based substances, without changing or altering the natural aspect of the stone material. Highly recommended for areas in constant contact with water and food based substances such as tables, bar-tops, vanity and kitchen work surfaces or as a pre treatment on floor surfaces so to avoid problematic grout haze, salts and general surface stains. Compatible on humid or damp surfaces, therefore saving time during application process

 How to use?

 Apply Hidro Protector MM uniformly by brush, lamb wool or roller on a clean surface. After 5-10 minutes, remove any excess residues and buff with a clean cloth; allow surface to dry for 6 hours. *Resume normal activities ‘only after the surface is completely dry.  

 On extremely porous/soft absorbing materials; apply a second coat of Hidro Protector MM within 30 minutes and allow the first coating to absorb before proceeding to the second coat. *If the first coat is dry, the second coat may not be easy to apply. 

 Industrial inline application; Apply product using immersion or spraying method. On compact non porous material, application can also be carried out with a roller or sponge.  

 6 Side’s application: Apply first on the upper surface, after dry; apply on the sides follows by the back. Wait at least 24 hours before setting or grouting.